1. Product No: ONG4350A
2. Brief:
PE/PO/PP Dehydrator has been researched and developed specially for the moisture problem. It can absorb the moisture in PE/PO/PP resin greatly without bringing quality down. We invented this technology earlier than anybody else in China. It is widely used in the recycled PE/PO/PP resin, the moisturized brand-new PE/PO/PP resin and the processing of biodegradable resin/masterbatch. The cost can be reduced, the productivity can be raised accordingly.
3. Application:
Making films, packing bag, sheets, scupper pipe and injection mould products.
4. Physical index:
Melt index: <8.0g/10min
Water: <1.0%
Density: <1.8g/ cm3
Color: gray (pellet)
Ash content: 85%
Volatile content: <2%
5. Features:
a) Water Absorbability: Can absorb wet contents as much as: PE/PO/PP Dehydrator’s weight X 20%.
b) Processing Requirements: Ordinary equipments and conditions.
c) Ideal Additive: No toxin, regular granule, easy to mixture.
6. Processing:
a) Adding Ratio: typically 1%.
b) Very Important: Immediately heat-seal inner polybag after unpacking; After PE/PO/PP pellets are mixed with “ONG4350A”, start with massive production as soon as possible.
7. Main Ingredient:
Calcium carbonate (CaCO3)/LLDPE.
8. Storage and Packing: Outer package is craft paper bag, inner package is polybag; net weight is 25-kg, keep in dry, cool, clean place with good ventilation, protect from sunlight, rain and do not damage the package
|
|
|
|
|
